Pay Now

GYPSUM PLASTER

It is a single coat gypsum plaster suitable for internal wall surfaces made up of block, brick or stone. Special additives & aggregates added in MagicPlast give better surface finish, coverage and workability as compared to normal gypsum plasters.

Gypsum, the magic mineral has been used by man in construction in the form of plaster since 9000 B.C. More than 1500 million meter square of European interior surfaces are covered every year with gypsum based plaster or plaster board.

It is available in Superfine, Elite & Spray Elite variants.

MagicPlast Features

HIGH STRENGTH

High degree of compressive strength, which increases overall masonry strength

NO CURING. SAVES WATER

Gypsum is self-setting material hence once set does not need any more curing

HIGH THERMAL INSULATION

R = 0.07 m2k/w at 13mm thickness

EXCELLENT COVERAGE

Due to lower density & higher volume, Magicplast covers 18-24sqft per bag with a thickness of 13mm on AAC Block

SINGLE COAT APPLICATION

It can be used directly on all internal surfaces like brickwork, hollow & solid concrete block

CRACKS FREE WALL

Gypsum does not shrink or expand once setting process is complete. Hence, crack free walls are assured

ECONOMICAL

Gypsum provides smooth satin finish walls in single coat, hence saves money as well as time for putty coating

FASTER APPLICATION

Its remarkable flow ability allows faster application

Technical Specifications

PARAMETERS SUPERFINE ELITE SPRAY ELITE
Appearance White Powder White Powder White Powder
Pot Life 12 mins 15 mins 22-25 mins
Dry Bulk Density 900 kg/m³ 650-710 kg/m³ 650-770 kg/m³
Initial Setting Time 10-12 minutes 12-15 minutes 22-25 minutes
Coverage @ Thickness 13mm 18-20 sqft / bag of 25 kg 22-24 sqft / bag of 25 kg 20-22 sqft / bag of 25 kg

*Specifications may vary, due to continuous product development

PREPARATION & APPLICATION

PREPARATION

  • The background to be plastered should be free from dust & loose mortar
  • For higher coverage pre wetting of background is recommended
  • For plaster mix, add gypsum to water not vice versa & water to Magicplast ratio should be 1:1.5
  • Stir the mixer with a mixing rod thoroughly
  • Prepare plaster mix which should not last more than 15 minutes
  • Do not mix additional dry material once the mix begins to set
  • A single coat should not exceed 13 mm, if more than 13 mm thickness desired than it can be done after drying of first layer
  • To enhance the workability plaster spray machine can be used

DOWNLOAD

MAGICPLAST WALL PUTTY BROCHURE